Hot Flue Gas Rotary Cylinder Coal Drying Technology

Min. Order: 1 Piece
Payment Terms: L/C, T/T

Similar Items

Loading...

You May Like

Loading...

Product Description

Company Info

Product Description

The rotary dryer with flue gas as the heat medium is a conventional coal drying technology, and widely used in drying various coal property and coal slime. The Drying Engineering Center makes technological advances and upgrades to the traditional technology and develop technology of rotary drying with closed circulating inert gas, which not only maximizes the reduction of operating cost, but also uses patented sealing technology to seal inlet and outlet of the dryer, the system is in full closed operation, safety and environment friendly. The technology has been applied in the first section drying system of coal catalyst for Shenhua coal oil device and runs well.
The using condition of the hot flue gas rotary drying technology: Pre-dried coal types: Long flame coal, lignite; (2)the water content: Long flame coal: 25~38%, lignite: 33%~55%; (3)the single set processing capacity: 100t/h for long flame coal, 80t/h for lignite; (4)the single set water evaporation: ≤ 25t/h; (5) The heat source medium: Flue gas produced by hot air furnace; (6) the device investment: The processing ability of 150t/h, ~30 million / set; ( 7) the operating cost: Equal to ~50 Yuan per ton of dry coal (heat source medium gas); ( 8) safe operation, stable and reliable.
Address: No 3 North Heshui Road, Xigu, Lanzhou, Gansu, China
Business Type: Manufacturer/Factory
Business Range: Manufacturing & Processing Machinery, Service
Management System Certification: ISO 14001, ISO 9001, OHSAS/ OHSMS 18001, QHSE
Company Introduction: The Res. Inst of Chem. Mach of the Ministry of Chemical Industry was founded in Beijing in 1958, and moved to Lanzhou in 1965.

The Res. Inst of Automation of the Ministry of Chemical Industry was founded in Lanzhou in 1963.

In 1997, the Res. Inst. Of Chem. Mach of the Ministry of Chemical Industry and the Res. Inst. Of Automation of the Ministry of Chemical Industry were combined to become the Res. Inst of Chemical Machinery and Automation of the Ministry of Chemical Industry.

In 2000, the Res. Inst of Chemical Machinery and Automation of the Ministry of ChemicalIndustry completed its transformation to enterprise and registered as Tianhua Instituteof Chemical Machinery and Automation.

Tianhua Institute has the following subordinated institutions:

Supervision and Inspection Center of the Quality of Chemical Equipments in Nanjing, Jiangsu Province

Nanjing Equipment Institute in Nanjing, Jiangsu Province;

Automation Institute in Suzhou, Jiangsu Province;

Lanzhou Ruima Chemical Machinery Co Ltd in Lanzhou, Gansu Province;

Lanzhou Ruide Drying Technology Co Ltd in Lanzhou, Gansu Province;

LanzhouLantai Plastics Machinery Co Ltd in Lanzhou, Gansu Province;

Gansu Airuike Automation Technology Co Ltd in Lanzhou, Gansu Province;

The Lanzhou United Institute of Chemical Machinery and automation and the Nanjing United Institute of Petrochemical Industry Furnaces were founded by Tianhua Institute and the Sinopec.

Tianhua Institute has an occupation area of 80 000m2 and a total asset of 1 407 000 000 Yuan (RMB). The annual output value is 1 000 000 000 Yuan (RMB).

Tianhua Institute has about 916 employees, 75% of them are professional personnel. Among them are 23 professors, 249senior engineers, 226 engineers. 29 professors and senior engineers enjoy national special subsidy, On 5 people the title of Middle-aged and Young Specialist with Outstanding Contribution to the P. R. China are conferred
Once receive your question, the supplier will answer you as soon as possible.

Send your message to this supplier

Mr. Simon Hong

Post a Sourcing Request Now